The bathtub is one of the most relaxing places in the house, but also one of the places that gets dirty most easily. Soap buildup, moisture and other debris can make the bathtub look dirty and unattractive, which can be a problem especially if you have visitors in the house.
In addition, a dirty bathtub can be a breeding ground for bacteria and germs, which can be a health hazard. Therefore, it is important to know how to deep clean your bathtub to keep it clean and bacteria-free.
In this article, we will show you how to deep clean the bathtub, removing all the dirt and leaving it in perfect condition for your next relaxing bath.
Preparation: What materials do you need to clean the bathtub?
Before you begin the task of how to deep clean your bathtub, it is important to make sure you have all the necessary materials on hand. You will need cleaning products, such as dish soap, baking soda, white vinegar and/or commercial bathroom cleaner, as well as a sponge, scrub brush, microfiber cloth and cleaning gloves.
Once you have the materials, it is important to properly prepare for cleaning. If you are going to use chemicals, be sure to ventilate the bathroom to avoid inhaling fumes. Also, it is advisable to wear cleaning gloves to protect your hands and skin from any chemicals you may use.
Before you begin cleaning, be sure to remove any personal items that may be inside the tub, such as bath toys, non-slip mats, etc. If you have a shower head, be sure to cover it with a plastic bag to prevent it from getting wet during cleaning.
Once you have removed the personal items and covered the showerhead, it’s time to start deep cleaning the bathtub. Follow the instructions on your chosen cleaning product and use whatever materials you have on hand, such as a sponge or scrub brush, to properly clean the surface of the tub. Be sure to rinse the tub thoroughly after cleaning and remove any cleaning product residue before using the tub again.
Dirt removal.
Removing accumulated dirt and grime from your bathtub can be a challenge. There are several effective cleaning products you can use for the process of how to deep clean the bathtub, but it is important to choose the right one for the type of dirt you are trying to remove.
One of the most effective ways to remove dirt and grime from the bathtub is to use dish soap and baking soda. Mix one cup of baking soda with one tablespoon of dish soap and add enough water to make a thick paste. Apply the paste to the surface of the tub and let it sit for 10-15 minutes before scrubbing and rinsing well.
Another effective cleaning product is white vinegar. Pour a generous amount of white vinegar into the bathtub and let it sit for about 15-20 minutes before scrubbing and rinsing well. White vinegar is especially useful for removing mineral buildup and stains in the bathtub.
If you are looking for a commercial cleaning product, look for one that contains citric acid or hydrochloric acid. These cleaning products are effective at removing accumulated dirt and grime from the tub, but it’s important to follow the product’s instructions carefully and rinse well after use.
Whichever cleaning product you choose, be sure to wear cleaning gloves to protect your hands and skin from chemicals and follow all recommended safety precautions. If dirt and grime are particularly accumulated in the tub, it may be necessary to repeat the cleaning process several times to get the best results.
Stain removal.
Removing stubborn stains in the bathtub, such as mildew and soap buildup, can be a challenge. But there are several effective options that can help you tackle these stains and leave your bathtub looking spotless.
One effective way to remove mildew stains is to mix equal parts water and bleach in a spray bottle and spray the solution on the surface of the tub. Let the solution sit for about 15-20 minutes before gently scrubbing with a scrub brush and rinsing well. Be sure to thoroughly ventilate the bath during and after cleaning.
Another option for removing stubborn stains is to use white vinegar and baking soda. Mix one cup of white vinegar with one-half cup of baking soda and apply the solution to the stains in the bathtub. Let the solution sit for about 15-20 minutes before gently scrubbing with a scrub brush and rinsing well.
If soap buildup is the problem, try using a commercial bath cleaner containing citric acid or hydrochloric acid. Follow the product directions carefully and rinse well after use.
It is important to note that tough stains may require multiple applications and scrubbing with a scrub brush for best results. In addition, it is advisable to wear cleaning gloves to protect hands and skin from chemicals during cleaning.
Surface cleaning.
Once you have removed stubborn dirt and stains from the bathtub, it is important to properly clean and disinfect the surface to remove any bacteria or germs that may have been left behind. To do this, you can use commercial cleaning products specifically for disinfecting bath surfaces or make your own disinfectant solution.
One effective way to disinfect the bathtub surface is to use a bleach and water solution. Mix one part bleach to ten parts water in a spray bottle and apply the solution to the tub surface. Let the solution sit for about 10-15 minutes before rinsing well with clean water.
You can also use diluted isopropyl alcohol to disinfect the tub surface. Mix equal parts alcohol and water in a spray bottle and apply the solution to the tub surface. Let the solution sit for about 5-10 minutes before rinsing well with clean water.
It is important to follow the recommended safety precautions when using cleaning products, including wearing cleaning gloves and making sure to thoroughly ventilate the bathroom during and after cleaning.
After disinfection, it is recommended that the bath surface be rinsed with clean water and dried thoroughly to prevent moisture build-up. This will also help keep the bathtub surface shiny and free of stains.
Cleaning the tiles.
The tiles around the bathtub can easily accumulate dirt, mildew and stains due to moisture and frequent contact with water. It is important to clean them regularly to maintain a clean and healthy bathroom environment.
To clean tiles, you can use commercial tile-specific cleaning products or make your own cleaning solution. An effective solution for cleaning tiles is to mix white vinegar with water in equal parts and apply it to the tiles with a cloth or sponge.
You can also use baking soda and water to make a thick paste and apply it to the tiles. Let the paste sit for about 10-15 minutes before scrubbing with a soft bristle brush and rinsing with clean water.
Another useful cleaning product for cleaning tiles is liquid bleach. Mix a small amount of liquid bleach with water in a spray bottle and apply the solution to the tiles. Let the solution sit for a few minutes before rinsing well with clean water.
It is important to follow recommended safety precautions when using cleaning products, including wearing cleaning gloves and making sure to thoroughly ventilate the bathroom during and after cleaning.
After cleaning, it is advisable to dry the tiles thoroughly to prevent moisture buildup and mold and mildew. You can also apply tile sealer to protect the tiles from moisture and dirt.
Safety.
It is important to take certain safety precautions when performing the task of deep cleaning the bathtub, in order to avoid injuries and accidents. Below are some recommendations that you should consider during cleaning:
First, it is important to make sure you have sufficient ventilation in the bathroom. If you use cleaning products that emit fumes, such as bleach or bathroom cleaners, be sure to open a window or turn on the exhaust fan to allow air to circulate.
In addition, it is advisable to wear rubber gloves during cleaning to protect your hands from the chemicals. Make sure the gloves completely cover your hands and are in good condition.
It is also important to be careful when using cleaning products and follow the manufacturer’s instructions. Never mix different cleaning products, as this can cause dangerous chemical reactions.
If you use a brush or sponge to scrub the tub, make sure it has soft bristles to avoid scratching the tub surface. Also, avoid applying too much pressure when scrubbing to avoid damaging the surface.
Finally, after cleaning, be sure to carefully clean and dry all surfaces of the bathtub to avoid slipping and falling.
